This is the FuzeFix Modular Tray
It consists of 1 Base Tray, and 15 Caddies to choose from. There are 8 Mini HD and Mini HL Caddies, 3 Max FT Caddies, 1 IntraLock Caddy and Instrument Set, and 2 DynaBridge Caddies. The Base Tray has generic instrumentation affixed into it.
You may request any combination of Caddies to be added to your Base Tray. Read further for possible configurations of this Modular Tray.
Mini HD & HL Caddies
There are 4 Mini HD (2.0, 2.5, 3.0, & 4.0) and 4 Mini HL Caddies (2.0, 2.5, 3.0, & 4.0). The standard load out of the caddy will only include a limited number of screws (see picture above). Additional screws and screw lengths are available upon request.
You can select up to 4 of these caddies for a maximum load-out of the Base Tray.
Max FT Caddies
There are 3 Max FT Caddies (2.5, 3.5, & 4.5). The standard load out of the caddy will only include a limited number of screws (see picture above). Additional screws and screw lengths are available upon request.
The Tray load-out above shows 3 Max FT Caddies with one slot empty.
IntraLock Caddy & Instruments
There is 1 IntraLock Caddy and 1 IL Instrument Set. The standard load out of the IL caddy is shown above. Additional Lag Screws are available upon request.
If the IntraLock Caddy is added to the Base Tray, you may select up to 2 more screw caddies for a maximum load-out
DynaBridge Caddies
There are 2 DynaBridge Caddies. The DB Caddies can stack on top of each other and take up a long slot in the Base Tray.
With the 2 DynaBridge Caddies loaded in the Base Tray. You may still add up to 2 more screw caddies. A DynaBridge Caddy and an IntraLock Caddy cannot fit in 1 Base Tray, but can be provided separately.
